The circular saw machine should be strictly checked before the shift, carry out the necessary inspections according to the equipment manual, maintain good usage habits, ensure the safety of the equipment, improve the work efficiency, and at the same time develop the work quality of the employees.

Check the equipment before starting:

1. The metal circular saw blade should be cleaned before starting the equipment, especially the small iron filings, pay attention to the cleaning of the sawtooth parts.

2. Turn the metal circular saw blade gently by hand to see if there is any abnormal noise, whether the rotation is normal, and if there are any signs of looseness.

3. In the investigation of the organ parts of the circular saw machine, some staff will make mistakes in operation, and will leave tools inside, especially gloves.

4. Check the circuit. Check the inside of the machine and the power supply regularly to avoid electric shock. It is strictly forbidden to mix water or liquid in the circuit part!

5. Check whether the material to be cut corresponds to the equipment model and metal circular saw blade specifications. Different materials require different equipment and saw blades, otherwise the circular saw machine and saw blades will be damaged.

6. Before sawing the material, you should check whether there are irregularities or uneven parts, and follow the relevant instructions to deal with, otherwise it will damage the saw blade.

7. On the same side of the equipment, clean those items that are prone to flying, such as plastic bags and paper towels. Once these items fly into the device, there will be unpredictable accidents.

8. In non-essential situations, the protective cover of the circular saw must be closed, and it is strictly forbidden to open it without permission!

9. Do not leave long hair when operating the equipment, dress must be kept clean and tidy, and do not operate when drunk or in poor mental state.

10. Check the saw blades for cracks, chipping and other phenomena, keep the metal circular saw blade sharp, and do not exceed the service life range.